Cutting And Stamping Plane Workpiece Corner Rounding
Workpieces that have been punched, laser-cut, and surface-ground require rounded corners to remove sharp edges and produce a well-proportioned fillet.
Jonsen series equipment can remove lateral burrs in all directions, thus completely removing the side burrs of the workpiece, and replacing the burr removal in the pure sense with rounding corners, forming a soft and smooth arc at the edge of the workpiece, achieving a high quality uniform micro-pour Corner effect.
For some special industry requirements, Jonsen SP series equipment can make 2mm uniform chamfering for carbon steel parts in one feeding condition.
We can provide you with personalized product testing services. You are very welcome to visit our factory in Hangzhou and the showrooms in Beijing, Shanghai, Suzhou, Qingdao, Dongguan and Chengdu.
Suitable Models For Cutting And Punching Flat Workpiece Corners Are:
SP800 is a very versatile machine model. The wide abrasive belt head is capable of sanding down and removing the bigger burrs on the parts, or using it for whole surface finishing purpose such as No.4 finishing.
SP1000 is a very versatile machine model. The wide abrasive belt head is capable of sanding down and removing the bigger burrs on the parts, or using it for whole surface finishing purpose such as No.4 finishing.
SGP1000 is a very versatile machine model. The wide abrasive belt head is capable of sanding down and removing the bigger burrs on the parts, or using it for whole surface finishing purpose such as No.4 finishing.
SD-H is suitable for small batch parts deburring and edge rounding. It has much better working efficiency, and more consistent performance than traditional hand held angle grinder or orbital sander.
